Siemens Gigaset A400 User's Guide download pdf (Page 11)

A400/A400A / GBR / A31008-M2201-L101-2-7619 / main.fm / 27.04.2011

Remote operation when on the move

You can check and activate your answering machine

from any other telephone ( hotel, pay phone etc.).

Prerequisites:

u You have set a system PIN other than 0000

¢ page 18.

u The phone you are using for remote operation has

ne dialling (DTMF) i. e., you hear different tones

en you press the keys.

Calling the answering machine and playing

messages

(Dial your own number) ¤ while listening to your

announcement: press the 9



key and enter the system

The following keys are used for operation:

Activating the answering machine

(Enter your own number and allow the phone to ring

until you hear the message: "Please enter PIN") ¤ ~

enter system PIN

Your answering machine is activated. It tells you how

much capacity is left. The messages are played. The

answering machine cannot be deactivated remotely.

Locating a handset (paging)

You can locate your handset using the base.

u Briefly press the registration/paging key on the

base (¢ pa

ge 1).

u All handsets will ring simultaneously (paging),

eve

n if the ringer melodies are deactivated.

End paging: briefly press

the r

egistration/paging key

on the base station (¢ page 1) or the talk key

c on a

handset.

Registering handsets

You can register up to four handsets on your base.

Each additional handset must be registered with the

base for it to work properly!

Registration takes approx. 1 minute.

Handsets are assigned the lowest available internal

number (1-4). I

the internal numbers 1–4 are already

assigned to other devices, the number 4 is overwrit-

ten.

De-registering handsets

Menu ¤ Settings ¤ OK ¤ Handset ¤ OK

¤ De-register HS ¤ OK ¤ q Select handset ¤ OK ¤ Enter

the base system PIN (default setting: 0000) ¤ OK

The selected handset is de-registered.

Using multiple handsets

Making internal calls

Internal calls are free calls to other handsets that are

registered to the same base.

To make a call to other handsets, press

u ¤ q (Select internal number of handset) or

(Enter internal number directly) ¤ OK, the

handset is called or

u ¤ Call All ¤ OK, all handsets are called (alterna-

tively you can also press and hol

d the control key

u or press u ¤ P).

To end the call, press the end call key

Go to the start of the current message.

Press twice to go back to the previous

messa

ge.

Stop playback. Press again to resume.

Go to the next message.

Delete current message.

1) On the handset

Menu ¤ Settings ¤ OK ¤ Handset ¤ OK

¤ Register HS ¤ OK ¤ Enter the base system PIN

(default setting: 0000) ¤ OK

Registering flashes on the display.

2) On the base

Within 60

seconds

of entering the system PIN,

press and (¢ page 1) hold the registration/paging

y (min. 3 seconds).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

Siemens Gigaset A400 User's Guide Page 11

Comments to this Manuals

Related products and manuals for Telephones Siemens Gigaset A400