Siemens GS36NBI30 User Manual download pdf (Page 27)

en

27

Setting

the temperature

Fig. 2

Freezer compartment

The temperature can be set from -16 °C

to -26 °C.

Keep pressing temperature setting

button 5 until the required freezer

compartment temperature is set.

The value last selected is saved. The set

temperature is indicated on display 1.

We recommend a factory setting of -

18 °C in the freezer compartment.

Energy saving mode

When the appliance is not used,

the display on the controls switches

to energy saving mode.

■ Energy saving mode display, Fig. 2/

6, illuminates.

■ The luminosity of the temperature

displays is reduced.

■ When the “Super” function is switched

on, the corresponding super display is

lit (Super freezing display, Fig. 2/2).

As soon as you operate the appliance,

e.g. open door or press any button,

the display switches to normal

illumination.

Alarm function

In the following cases an alarm may be

actuated.

Door alarm

The door alarm (continuous sound)

switches on and the “alarm” display 2/4

is lit, if the appliance door is open for

longer than one minute. Close the door

or press any button to switch the door

alarm off again.

Temperature alarm

The temperature alarm switches on

if the freezer compartment is too warm

and the frozen food is at risk of thawing.

The alarm display 4 is lit.

When the alarm button 4 is pressed,

the temperature display 1 indicates for

five seconds the warmest temperature

reached in the freezer compartment.

Then this value is deleted and

the temperature display 1 indicates

the set temperature.

The alarm may switch on without any risk

to the frozen food

■ when the appliance is switched on,

■ when large quantities of fresh food are

placed in the appliance,

■ if the freezer compartment door is

open too long.

Switching off the alarm

Fig. 2

Press the alarm button 4 to switch off

the warning signal.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

Comments to this Manuals

No comments