Siemens PC 870 Operations Instructions download pdf (Page 58)

Maintenance and servicing

11.1 Installing and removing hardware components

Panel PC 870 V2, Computer Unit

11-6 Operating Instructions, Edition 03/2004, CD Documentation and Drivers

Inserting the slider

To insert the slider:

How to install a module bracket

1 Push the slider through the

guide slot until it is seated

firmly on the module. Insert

the module into the slot.

Caution

Do not apply any pressure on the module! Hence, do not apply excessive force on the slider

when you push it onto the module.

2 Cut off the rest of the slider

element: Use a knife to apply a

cut on the slider at the upper

edge of the bracket and then

break this section off. Cut off

the residual element using a

side cutter.

Notes on the allocation of resources

Due to the number of functions on the motherboard, there are no reserved interrupts for PCI

modules. If the new expansion module requires exclusive resources, you have to disable the

functions on the motherboard. For information on allocated resources, refer to the system

resources section. For information on how to disable motherboard functions, refer to the

BIOS Setup. Information on the assignment of PCI IRQs to the PCI slots is found in the

"Advanced Menu" or "Bus Board" sections.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 167 168

No comments

Siemens PC 870 Operations Instructions Page 58