Functions
10.5 Safecard on Motherboard (SOM)
Panel PC 870 V2, Computer Unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
10-3
10.5 Safecard on Motherboard (SOM)
This application is used to monitor PC hardware (temperature, watchdog and fans) and to
display the current measured values. The application can be configured on a GUI, and
temperature monitoring, the watchdog function and fan monitoring can be enabled.
Your SIMATIC PC is equipped with three thermocouples, which are automatically detected
by the application.
Figure 10-1 Safecard On Motherboard with three thermocouples
1 Temperature range: You are here shown the current temperature and limit values. You can
toggle the temperature display mode to indicate either the current
temperature, or the min./max. values measured since the start of the
application. You can set a check box to enable polling or interrupt mode
for the temperature monitoring function.
2 Watchdog area: Here, you can configure the watchdog function in your monitoring
application. You can specify the watchdog time, assign an interrupt,
activate a PC reset and activate / deactivate the watchdog.
3 Fan area: In this area you can visualize the current speed of the fans.
The description of the driver and SOM program are available on the CD "Documentation and
Drivers" under Drivers & Updates\<device>\...
From the CD, run Install.bat and follow the instructions on your screen.
Comments to this Manuals