Siemens SPCK620 User's Guide download pdf (Page 29)

User programming via the keypad

User Menus

Siemens AB

A6V10271018

Security Products

26.09.2011

 X-BUS TAMPER

VIEW INHIBITS

To view a list of the inhibited zones, system alerts and X-BUS device alerts.

Only the ALARM, EXIT/ENTRY, FIRE EXIT and LINE zone types can be inhibited

on the SPC system. All other zone types are not displayed in the inhibit menus.

7.1.4 SET DATE/TIME

The date and time can be manually entered on the system. The time and date

information is displayed on the keypad and browser and is used on time-related

programming features.

1. Scroll to SET DATE/TIME and press SELECT.

 The date displays on the top line of the display.

2. To enter a new date, press the required numeric keys. To move the cursor to

the left and right, press the left and right arrow keys.

3. Press ENTER to save the new date.

 If an attempt is made to save an invalid date value, the text INVALID

VALUE is displayed for 1 second and the user is prompted to enter a valid

date.

4. To enter a new time, press the required numeric keys. To move the cursor to

the left and right, press the left and right arrow keys.

5. Press ENTER to save the new time.

 If an attempt is made to save an invalid time value, the text INVALID

VALUE is displayed for 1 second and the user is prompted to enter a valid

time.

7.1.5 TEST

1. Scroll to TEST and press SELECT.

2. Scroll to the desired programming option.

7.1.5.1 BELL TEST

To perform a bell test:

 Scroll to TEST > BELL TEST and press SELECT.

 When BELL TEST is selected, the following options available: EXTERNAL

BELLS, STROBE, INTERNAL BELLS and BUZZER. When each of these

options is selected, the device sounds to verify it is operating correctly.

7.1.5.2 WALK TEST

A walk test ensures that the sensors are operating correctly on the SPC system.

To perform a walk test:

1. Scroll to TEST > WALK TEST.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

No comments

Siemens SPCK620 User's Guide Page 29