Siemens SPCK620 User's Guide Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
User programming via the keypad
7
User Menus
27
Siemens AB
A6V10271018
Security Products
26.09.2011
2
INHIBIT
Allows users to inhibit a zone.
3
ISOLATE
Allows users to isolate a zone.
4
SET DATE/TIME
Allows users to set the time and date.
5
TEST
Allows users to perform a BELL TEST, WALK TEST, WPA
TEST or change AUDIBLE OPTIONS.
6
EVENT LOG
Allows users to view a log of the most recent events on the
system.
7
ACCESS LOG
Allows users to view a log of the most recent access on the
system.
8
CHIME
Allows user to enable or disable chime function on all zones
where the chime has been programmed as an audible alert
feature.
9
USERS
Allows Manager type users to add, edit, and delete users.
10
CHANGE PIN
Allows users to change their user PIN..
11
SMS CONTROL
Allows users to configure SMS PIN.
12
SMS EVENTS
Allows users to set up the SMS service for sending short
text messages to mobile phones via the PSTN Line.
13
DOOR CONTROL
Allows the user to control doors. He can lock / unlock and
reset the door to normal operation.
14
GRANT ACCESS
Allows users to grant Engineer or Manufacturer access to
the system.
15
REPORT TO ENG
Allows the user to request that the last 10 events in the log
be sent to the engineer by SMS message. The 10 events
may require more than one SMS message, depending on
the size of their string.
If the Security Grade of the system is set to ’Unrestricted, then the INHIBIT,
ISOLATE and GRANT ACCESS features may not be available in the user menu.
A Standard or Manager Type User profile is required to access the user
programming menus.
7.1.1 SYSTEM STATUS
The System Status feature displays all faults on the system.
To view these faults:
1. Scroll to SYSTEM STATUS.
2. Press SELECT.
A list of the alerts, isolations or open zones will be displayed.
The status of the battery and auxiliary power is also displayed.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 42 43

Comments to this Manuals

No comments