Siemens SPCK620 User's Guide download pdf (Page 23)

Multi area view

Time Locked

Siemens AB

A6V10271018

Security Products

26.09.2011

configurable by the installer (default 10 minutes) to inform the user before the area

sets. The timer symbol will display next to the area at the configured warning time.

The keypad displays that the area will set in ‘X’ minutes or seconds. You will hear

an audible beep for each elapsed minute and every 10 seconds during the final

minute.

When the timer displays next to an area, 3 timer symbols display above the soft

keys:

Symbol

Function

To view the number of minutes left before the area sets:

Press the soft key below the Timer Info symbol.

Example:

TIME TO FULLSET

9 MIN 3 SEC

To delay setting by the configured time (default 30 minutes):

Press the soft key below the Delay Timer symbol.

Example:

TIME TO FULLSET

68 MIN 30 SEC.

You can press this soft key up to 3 times by default (configurable by

installer) to increment the configured time. In this case, the icon is no

longer displayed.

To cancel automatic setting for a standard area:

Press the soft key below the Cancel Timer symbol.

The Timer Info and Delay Timer icons are no longer displayed. You must

manually set this area.

6.6 Time Locked

Time locked applies to a vault type of area only. If time locked is applied to a vault

area, you can only unset the vault during times defined by the assigned calendar.

The padlock symbol is displayed next to the vault area to indicate when it cannot

be unset.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

No comments

Siemens SPCK620 User's Guide Page 23