Siemens SPCK 421 User's Guide download pdf (Page 28)

User programming via the keypad

User Menus

Siemens AB

A6V10209178

Security Products

26.09.2011

The SMS operates using a standard protocol that is used in SMS telephones.

Please note that some PSTN operators do not provide the service of SMS over

PSTN. For SMS to operate over PSTN the following criteria is required:

 Caller ID needs to be enabled on the telephone line.

 Direct telephone line – not through PABX or other comms equipment.

 Please also note that most Service Providers only allow SMS to a telephone

registered in the same country. (This is due to billing issues)

6.2.11 DOOR CONTROL

This option allows you to control all the doors of the system.

1. Scroll to DOOR CONTROL and press SELECT.

2. Select the door which should be controlled and press SELECT.

3. Select one of the door states listed below as new door state and press

SELECT.

NORMAL

The door is in normal operation mode. A card with the corresponding

access rights is needed to open the door.

MOMENTARY

The door is opened only for a timed interval to allow access.

LOCKED

The door is locked. The door remains closed even if a card with the

corresponding access rights is presented.

UNLOCKED

The door is unlocked.

6.2.12 GRANT ACCESS

NOTICE

These menu options are not available if the ALLOW ENGINEER or ALLOW

MANUFACTURER options are disabled in the OPTIONs menu. These options

can be enabled or disabled only when the system is in ‘Unrestricted’ mode.

When engineer or manufacturer access has been allowed, the keypad displays the

text ENGINEER ENABLE or MANUFACT ENABLE. When access has been

granted, the user cannot access the system until the engineer has logged off.

To allow engineer access:

1. Scroll to GRANT ACCESS and press SELECT.

2. Select to ALLOW ENGINEER and select ENABLED.

3. Select to ALLOW MANUFACT. and select ENABLED.

4. To disallow engineer/manufacturer access, follow the same path and toggle to

DISABLED and press SELECT.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Siemens SPCK 421 User's Guide Page 28

Comments to this Manuals

Related products and manuals for Numeric keypads Siemens SPCK 421