Siemens SPCK 421 User's Guide download pdf (Page 16)

User programming via the keypad

Setting and unsetting the system

Siemens AB

A6V10209178

Security Products

26.09.2011

The system fails to set if there is an open or fault condition detected on an alarm

zone when the FULLSET or PARTSET A/B option is selected. The keypad

displays the zone number and description.

To set the system, locate the zone and close or fix the fault. Repeat the FULLSET

or PARTSET A/B operation.

6.1.3 PARTSET

The PARTSET option provides the following functionality:

 Perimeter protection to a building while allowing free movement through the

exit and access areas

 Exclusion of EXCLUDE A/B zones from protection

 Instant activation of alarm on selection of mode; by default there are no exit

times associated with PARTSET A/B.

To select PARTSET A/B:

1. Scroll to PARTSET A or PARTSET B.

2. Press SELECT.

 The LCD displays PARTSET A/B SET on the bottom line for approximately 10

seconds.

The system fails to set if there is an open or fault condition detected on an alarm

zone when the FULLSET or PARTSET A/B option is selected. The keypad

displays the zone number and description.

To set the system, locate the zone and close or fix the fault. Repeat the FULLSET

or PARTSET A/B operation.

6.1.4 FORCE TO SET

The system can be forced to set while an alarm zone is still open. This operation

inhibits the open zone and sets the system as normal.

To force to set the system:

1. Scroll to FULLSET or PARTSET A/B.

2. Press SELECT.

 The keypad buzzer beeps and the first line of the display indicates the open

zone

3. Scroll to FORCED SET.

4. Press SELECT.

6.1.5 RESTORE

Alert conditions on the SPC system are indicated on the keypad by a flashing

yellow alert LED and by activation of the buzzer. The keypad indicates the location

and nature of the alert condition. The ability of a user to restore alerts depends on

the security grade setting of the system (in accordance with standards). An alert

condition can only be restored once the fault or zone that caused the alert has

been physically reset to its normal operating state; e.g. an open zone has been

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Comments to this Manuals

No comments

Siemens SPCK 421 User's Guide Page 16

Comments to this Manuals

Related products and manuals for Numeric keypads Siemens SPCK 421