Siemens SX763 User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
29
First steps
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006
Schablone 2004_08_26
Checking the operating state
Your Gigaset SX763 WLAN dsl is now ready for use. The LED displays on the front panel
of the Gigaset SX763 WLAN dsl provide information about the operating state:
The LEDs (from left to right) have the following functions:
LED State Status
Power
On (green) The Gigaset SX763 WLAN dsl is connected to the mains.
Off The Gigaset SX763 WLAN dsl is disconnected from the
mains.
ADSL
On A DSL connection is established.
Flashing The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
Off DSL is deactivated.
Line
On One of the connected phones' receivers has been lifted for a
call (fixed network telephony).
Flashing The phone is ringing and a fixed network call is being
received or someone is waiting on the line.
Off There is currently no fixed network connection.
Online
On Connection to the Internet has been established.
Off There is no Internet connection.
USB
On (green) A device is connected to the Gigaset SX763 WLAN dsl via the
USB port.
Flashing
(green)
The connected device is active.
Flashing
quickly
The device connected on the USB port is using too much
power (see (page 131)).
Off There is no device connected.
LAN1 –
LAN4
On A device is connected to the relevant LAN port.
Flashing The relevant LAN port is sending or receiving data (traffic).
Off There is no device connected.
WLAN
On The radio interface is active.
Flashing The Gigaset SX763 WLAN dsl is sending or receiving data on
the radio interface.
Off The radio interface has been deactivated or no radio signal
is being received.
VoIP
On At least one port is configured for VoIP and VoIP access is
registered with the provider.
Flashing A call is currently being made via the Internet.
Off There is currently no connection for Internet telephony.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 155 156

Comments to this Manuals

No comments