Siemens SX763 User Manual download pdf (Page 73)

Configuring Advanced Settings

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006

Schablone 2005_05_02

Defining the private IP address for the Gigaset SX763 WLAN dsl

On this screen you can change the device's IP address. The preset IP address is

192.168.2.1. This is the Private IP address of the Gigaset SX763 WLAN dsl. This is the

address under which the device can be reached in the local network. It can be freely

assigned from the block of available addresses. The IP address under which the Gigaset

SX763 WLAN dsl can be reached from outside is assigned by the Internet service pro-

vider. The default Subnet mask for the local network administered by the Gigaset SX763

WLAN dsl is 255.255.255.0.

ì If you want to assign a different IP address to the Gigaset SX763 WLAN dsl, enter

your chosen IP address in the boxes next to IP address.

Please make sure to note which subnet mask is set when assigning the IP address. If

you are retaining the default subnet mask, the first three parts of the IP address must

be identical for all network components (including routers).

We recommend that you use an address from a block that is reserved for private use.

This address block is 192.168.1.1 to 192.168.255.254.

ì Adjust the Subnet mask if necessary.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 155 156

No comments

Siemens SX763 User Manual Page 73