Siemens SX763 User Manual download pdf (Page 48)

Security Setup Wizard

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006

Schablone 2005_05_02

WPA2/WPA with pre-shared key (PSK)

WPA is a more advanced procedure than WEP for protecting wireless networks. Dynamic

keys, based on TKIP (Temporal Key Integration Protocol) offer increased security. The

new standard WPA2 uses AES (Advanced Encryption Standard) for encryption.

WPA-PSK is a special WPA mode for private users and users in small companies without

their own authentication server. After a certain period of time (Rekey interval), encryp-

tion keys are automatically generated with the pre-shared key, automatically changed

("rekeying") and authenticated between the devices.

ì Select WPA2-PSK if WPA2 is supported by all components in the wireless network.

ì Select WPA2-PSK / WPA-PSK if some or all components in the wireless network only

support WPA.

ì Enter a key of your choice in the Pre-shared key field (min. 8 to max. 63 characters)

and confirm it by repeating the entry. You must set up the same pre-shared key for

all wirelessly connected PCs. Use a combination of letters, digits and special charac-

ters.

ì To go to the next step, click Next >

WEP encryption

WEP (Wired Equivalent Privacy) is an encryption for radio signals in wireless networks

and meets the IEEE 802.11 standard.

Note:

Every PC (network adapter) that requires access to a WPA-protected wireless network

must also support WPA. Information about this can be found in the operating manual

for your network adapter.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 155 156

No comments

Siemens SX763 User Manual Page 48