Siemens SED2 User Manual download pdf (Page 35)

AOP Setup & Configuration

Siemens Building Technologies, Inc. 27

2. Use and to select an ON or OFF user text status.

Press

to cancel this selection and to return to the setup menu.

Press

to confirm the selection and the AOP displays a text screen with the first character

highlighted. The text string can contain a maximum of 20 characters.

3. Use

and to scroll through the characters until the desired character is shown.

Press

to accept the character and to advance to the next character.

Repeat this step until the desired text is entered.

4. Press and hold

to except the text string and to return to the setup menu.

Press and hold

to cancel the text entry, restore the original text string, and to return to

the setup menu.

NOTE: Simultaneously press and at any time to display relevant help screens.

Parameter Set Names

Use the following procedure to edit the names associated with the ten AOP parameter sets.

NOTE: This editing option is not available in the standard access level.

1. Use and to highlight the Parameter Set Names option on the setup menu.

Press

to confirm the selection.

The AOP displays a parameter set name screen.

2. Use

and to scroll through the parameter sets and to highlight the name needing

editing.

Press

to confirm the selected parameter set name and the AOP highlights the first

character.

3. Use

and to scroll through the characters until the desired character is shown.

Press

to accept the character and to advance to the next character.

Repeat this step until the desired text is entered.

4. Press and hold

to except the text string and to return to the setup menu.

Press and hold

to cancel the text entry, restore the original text string, and to return to

the setup menu.

NOTE: Simultaneously press and at any time to display relevant help screens.

Set Time/Date

1. Use and to highlight the Set Time/Date option on the setup menu.

Press

to confirm the selection.

The AOP displays a set time screen and highlights the first time field (hours).

2. Use

and to scroll through the digits until the desired hour (0-23) displays.

Press

to confirm the entry.

The cursor advances to the next time field (minutes [0-59], and then seconds [0-59]).

Repeat this step until the desired time (hours-minutes-seconds) is set.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Siemens SED2 User Manual Page 35

Comments to this Manuals

Related products and manuals for Networking Siemens SED2