Siemens RUGGEDCOM RSG2200 Installation Guide Page 1

RuggedSwitch® RSG2200 9-Port Modular Managed Gigabit Ethernet Switch Installation Guide June 2, 2011 www.ruggedcom.com RuggedCom Inc. I

Product Overview Figure 2: Ethernet, LED Status, and Power Panels Power Terminal Block LED Display Panel I/O Ports Ethernet Ports Ethernet Ports E

Product Overview 3.4.1 Fiber Optical Transceiver Orientation and Connection Depending on the order code of the product, the RSG2000 series products

Product Overview Figure 8: 100FX ST connector 3.5 Display Panel Description The RSG2000 series products are equipped with a versatile display p

Product Overview Device status LEDs exist to provide a quick visual indicator to operators for operational status of the unit. Table 1 defines the

Installation 4 Installation 4.1 Rack Mounting Figure 10: RSG2000 Family 19” Rack Mount Adapters Figure 11: Rack mount adapter mounting location

Installation 4.2 Panel and DIN Rail Mounting The RSG2200 series products can be ordered as a Panel/DIN mount chassis. Both options involve the use

Installation 4.3 Power Supply Wiring and Grounding Figure 13: RSG2000 Series Phillips Screw Terminal Block Philips Screw Terminal without CoverPhil

Installation The RSG2200 family can be equipped with either a Phillips Screw Terminal Block or a Phoenix Plug Terminal Block. The Phillips Screw Ter

Installation 4.3.1 AC Power Supply Wiring Examples Figure 16: AC Single Power Supply Wiring Example Figure 17: AC Dual Redundant Power Supply Wi

Installation 4.3.2 DC Power Supply Wiring Examples Figure 18: DC Power Supply Wiring Examples Notes: 1. 125/250VDC rated equipment: A 300VDC a

Copyright COPYRIGHT © 2010 RuggedCom Inc. ALL RIGHTS RESERVED Dissemination or reproduction of this document, or evaluation and communication of its

Installation 4.3.3 Dual Power Supplies – DC and AC Inputs Figure 19: DC and AC Power Supply Wiring Examples Notes: 1. 125/250VDC rated equipme

Installation 4.4 Dielectric Strength (HIPOT) Testing For dielectric strength (HIPOT) testing in the field, users must remove the metal jumper locat

Installation 4.5 Failsafe Alarm Relay Wiring and Specifications The “Failsafe” output relay is provided to signal critical error conditions that ma

Installation 4.6 Console Port Wiring A RS232 console port for configuration and management of the device is located on the LED display module shown

Installation 4.7 Ethernet Ports 4.7.1 RJ45 Twisted-Pair Data Ports RS2000 series Ethernet switches are equipped with at least 24 10/100BaseTX ports

Installation Cabling Category 1000BaseTx Compliant Required action < 5 No New wire infrastructure required 5 Yes Verify TIA/EIA-568-A complianc

Installation 4.8 Pluggable optics – Installation, removal, and precautions The RSG2000 series of products can be ordered with pluggable optic form

Installation 4.8.2 GBIC Module Removal GBIC Modules have two locking latches on either side of the module shown in Figure 26. To remove GBIC modul

Technical Specifications 5 Technical Specifications 5.1 Power Supply Specifications Input Range Power Supply Type Min Max Internal Fuse Rating Ma

Technical Specifications 5.4 Copper Ethernet Port Specifications The RSG2200 can be ordered with two-port 10/100/1000Tx modules in slots 1, 2, 3, an

Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Cla

Technical Specifications 5.6.2 Gigabit Ethernet (1000Mbps) Optical Specifications 5.6.2.1 Fixed Gigabit Transceivers Order Code Mode Connector Type

Technical Specifications 5.7 Operating Environment Parameter Range Comments Ambient Operating Temperature -40 to 85C Ambient Temperature as mea

Technical Specifications 5.8 Mechanical Specifications Parameter Value Comments Dimensions 18.29 x 12.14 x 1.75 inches (464.57) x (308.36) x (

Type Tests 6 Type Tests 6.1.1 IEC 61850-3 Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8kV 4 IEC 61000-4-2 ESD

Type Tests 6.1.2 IEEE 1613 Type Tests IEEE Test IEEE 1613 Clause Description Test Levels Enclosure Contact +/- 2kV , +/- 4kV , +/- 8kV C37.90.3 9

Agency Approvals 35 RuggedCom® RuggedSwitch® RSG2200 Installation Guide rev115 7 Agency Approvals Agency Standards Comments CSA CSA C22.2 No. 60

Table of Contents Table of Contents 1 Table of Figures ...

Table of Figures 5 RuggedCom® RuggedSwitch® RSG2200 Installation Guide rev115 1 Table of Figures Figure 1: RSG2000 Rack mount chassis orientation op

Product Overview 3 Product Overview 3.1 Functional Overview The RuggedSwitch® RSG2200 is an industrially hardened, fully managed, modular, Ethernet

Product Overview 3.2 Feature Highlights Ethernet Ports  Up to 9-Gigabit Ethernet ports supporting copper and fiber media  Up to 9 100FX Fiber Fa

Product Overview Rugged Operating System (ROS®) Networking Features  Simple plug and play operation: automatic learning, negotiation, and crossover

Product Overview 3.3 Mounting Flexibility The RSG2000 series of products have been designed with maximum mounting and display flexibility. Custome