6 Texas Instruments Communication Driver Manual
Downloading Drivers to a PanelMate Unit
• In the VCP Transfer Utility, choose the “Executive” tab and select the proper Executive Firmware
to download to the PanelMate unit.
• Click the button labeled “Add to Operation List.”
Note: In order to download to a PanelMate for the first time or to clear the existence of another
driver, the PanelMate must first be loaded with Executive Firmware.
• Choose the “Driver” tab.
• Select the appropriate driver to be downloaded to the PanelMate.
• Click the button labeled “Add to Operation List.”
• Place the PanelMate unit in Serial Transfer Mode.
• Connect a serial transfer cable from the correct port on the PC to port 1 on the PanelMate. (See
cabling below.)
• Click “Start” at the bottom of the VCP Transfer Utility window.
• Note: For a more detailed description of downloading procedures and troubleshooting see
PanelMate Power Series, PowerPro, Pro LT Transfer Utility User’s Guide.
Serial Transfer Cables
Cable P/N 0518
Comments to this Manuals