Siemens 5930 Specifications download pdf (Page 8)

Chapter 1: Installation Efficient Networks

5930 Business Gateway

User Reference Guide

Page 1-2 Efficient Networks

Network Service Provider Requirements

Your Network Service Provider will have sent you information to configure your 5930

for your DSL connection. Depending upon the type of service that you ordered, you

should have received at least some of the items from the following list:

• DNS address

• One or more LAN IP addresses and a subnet mask

• Protocol to use, from one of the following:

– PPP (Point-to-Point Protocol), with a user name and password

– PPPoE (PPP over Ethernet)

– RFC 1483 (SNAP Encapsulation)

– RFC 1483 MER (MAC Encapsulated Routing, requiring a WAN gateway

address)

– VCI (PVC) numbers

• Network options:

– Bridging

– IP Routing (requires a WAN IP address and subnet mask)

Connecting Your Router

Step 1 Place your router in a location where it will be well ventilated. Do not stack it with

other devices or place it on carpet.

Step 2 Connect your PC directly to any of the router’s Ethernet ports using the RJ-45

cable provided. You may also connect additional Ethernet devices to the

router’s Ethernet ports.

Step 3 Connect your router to the DSL jack using the RJ-11 cable (purple label).

Step 4 Connect the router to an AC power supply using the power supply module and

Task Complete

locking power cord.

CAUTION:

To reduce the risk of fire, use only 26 AWG gauge telecommunication cord to connect

your DSL port on your router to a DSL telephone jack.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

Siemens 5930 Specifications Page 8