Siemens SX Series Specifications download pdf (Page 11)

Rinse aid en

11

, Rinse aid

Rinse aid

As soon as the rinse-aid refill

indicator P is lit on the fascia, there

is still a rinse-aid reserve of 1-2 rinsing

processes. Refill with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only

rinse aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH,

26° Clarke, 3.7 mmol/l) only. If

the water hardness is over 21° dH,

rinse aid must be used.

1. Open the dispenser 9* by pressing

and lifting the plate on the cover.

2. Carefully pour rinse aid up

to the max. mark in the filler opening.

3. Close cover until it clicks shut.

4. To prevent excessive foam formation

during the next rinse cycle, remove

any rinse aid which has run over with

acloth.

Setting amount of rinse aid

The amount of rinse aid can be set from

§:‹‹ to §:‹‡. Please set rinse aid on

§:‹† to obtain very good drying results

(§:‹† is already set in factory).

Change this setting, only if streaks

(select lower setting) or water stains

(select higher setting) are left on the

utensils.

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button )" until

•:‹.... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes and

the digital display 8 displays the

factory setting •:‹….

5. Press programme button # until

the factory set value §:‹† is

indicated on the digital display 8.

To change the setting:

1. Press programme button 3.

Each time the button is pressed, the

set value increases by one level;

when the value of §:‹‡ has been

reached, the display jumps back

to §:‹‹ (off).

2. Press START button )".

The set value is saved.

3. Close the door.





PD[

Downloaded from DishWasher-Manual.com Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comments to this Manuals

No comments