Siemens HiPath 1150 User Manual download pdf (Page 18)

Step by step

Functions used when making calls

Callback

Recall allows a call to be made automatically (via an

ISDN line) to an extension or an external line that is not

available at a certain time as soon as it becomes avail-

able.

Required: The destination number is not available.

Callback due to no answer/busy

(

) With standard MF telephones, first press the Flash key.

Enter the code to confirm the recall.

w Wait for a confirmation tone.

t Replace the handset.

w Wait for the recall.

If Recall If has been deactivated during configura-

tion, do the following to enable it

Wait 7 s w Wait 7 seconds until you hear a distinctive tone.

t Replace the handset.

w Wait for the recall.

Answering a recall

The telephone rings (a distinctive ring).

n Lift the handset.

w Wait for the call to be answered.

s Start conversation.

[1] Extension is busy - the system generates a recall as soon as a line

is available.

Extension is free - the system generates a recall once the caller has

returned to the station and made a call.

External number is busy - The system generates a recall as soon

as the destination number is free. This feature must be activated

by the carrier and the system needs to have a S

module installed.

Only one recall can be activated for each extension. A new recall

cancels the previous one.

[2] (See enabling recall/urgent call with timeout, in the programming

manual)



1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 98 99

No comments

Siemens HiPath 1150 User Manual Page 18