Siemens Gigaset CX100 isdn User Manual Page 54
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
52
Appendix
Gigaset CX100-150isdn / englisch / A31008-X150-G101-1-7619 / appendix.fm / 20.01.2004
Appendix
Care
Wipe the base and the handset with a damp cloth (do not use any solvent) or an
antistatic cloth. Never use a dry cloth as this can cause static discharge!
Contact with liquid
If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and Answers
If you have any questions about the use of your phone, you can contact us at any time
of the day and week at www.my-siemens.com
/customercare. You will find the most
frequently asked questions and answers below.
!
What has happened
when …
Possible Cause Possible solution
… the display is blank? The handset is not switched on.
The batteries are flat.
Press the end call key a for
around 2 sec..
Charge or replace the batteries
(page 8).
… the handset fails to respond
to a key press?
The keypad lock is activated. Press the hash key
R
for
around 2 seconds to
deactivate the lock (page 9).
… Base 1 or Searching for
Base, for example, is flashing
on the screen?
The handset is outside the range
of the base.
The handset is not registered.
The base is not switched on.
Move the handset nearer to the
base.
Register the handset
(page 41).
Check the power connector at
the base (page 6).
… the handset does not ring? The ringer is switched off. Activate the handset ringer
(page 46).
… the incoming call number is
not displayed even though
CLIP is set?
Calling Line Identification is
blocked.
The caller must ask his network
provider to enable the
identification of his number
(CLI).
… the handset does not ring
after the ISDN number (MSN)
has been set up?
The area prefix has been stored
with the MSN.
Store MSN without area prefix
(page 33).
… there are no incoming
calls?
Call forwarding Immediately
has been activated.
The MSN has not been assigned
to the internal user.
Deactivate call forwarding
Immediately (page 37).
Determine the receive MSN
(page 35).
- Classic S124 1
- User Manual 1
- The handset at a glance 3
- Safety precautions 6
- Connecting the base station 8
- Preparing to use the handset 9
- Preparing to use your phone 10
- Special keys 11
- Correcting wrong inputs 12
- Idle status 12
- Preparing to use the base 13
- Date and Time 15
- Making calls 16
- Accepting a call 17
- Handsfree 18
- Activating callback 19
- Accepting a callback 19
- Cancelling callback 19
- Functions during a call 20
- Internal enquiry call 21
- Toggling 22
- Conference call 22
- Transferring calls 23
- Cost of calls 24
- Directory and speed dial list 25
- Last number redial list 28
- Calls lists 29
- Opening calls lists 30
- Calling back a caller 30
- Displaying an entry 30
- Security settings 32
- System settings 34
- Assigning a receive MSN 37
- Assigning a send MSN 37
- Forwarding calls 39
- Restoring the factory setting 42
- Registration/paging key 43
- Manual registration: 44
- De-registering handsets 45
- Locating a handset (paging) 45
- Individual handset settings 46
- Changing the ringer tone 47
- Adjusting the ringer volume 48
- Handset settings as supplied 50
- Operating with other devices 51
- Access code 52
- Dialling options 53
- Appendix 54
- Guarantee 56
- Repair/maintenance 56
- Approval and conformity 57
- Specifications 58
- General Specifications 59
- Abc--> 60
- Compatibility 62
- Menu Tree 63
- Accessories 66
- ISDN glossary 68
- . . . . . . . . 16 78
- . . . . . . . . . . . 45 78
- . . . . . . . . . 10 78
Related products and manuals for Telephones Siemens Gigaset CX100 isdn
Telephones Siemens Gigaset A585 User's Guide
(64 pages)
(64 pages)
Telephones Siemens OpenStage 80 G User's Guide
(197 pages)
(197 pages)
Telephones Siemens Gigaset DL500A User Manual
(146 pages)
(146 pages)
Telephones Siemens 410 S Operations Instructions
(135 pages)
(135 pages)
Telephones Siemens Gigaset S44 User Manual
(159 pages)
(159 pages)
Telephones Siemens Gigaset SL 74 User Manual
(98 pages)
(98 pages)
Telephones Siemens Gigaset S440 User's Guide
(67 pages)
(67 pages)
Telephones Siemens Gigaset SL910A User Manual
(113 pages)
(113 pages)
Telephones Siemens Gigaset C380 User's Guide
(65 pages)
(65 pages)
Telephones Siemens Gigaset C610H User Manual
(234 pages)
(234 pages)
Telephones Siemens 600Series Specifications
(210 pages)
(210 pages)
Telephones Siemens Gigaset S445 User Manual
(78 pages)
(78 pages)
© 2020, manymanuals.com. All rights reserved. | 0.058 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals