Siemens SIMATIC PANEL PC 877 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
Fault tolerance, long service life and industry-compatible
design are features of the SIMATIC flat panel monitors.
They are fully industry-capable and can withstand even
vibration loads up to 1 g and shock loads up to 5 g.
The IP65/NEMA4 degree of protection means that dust
and moisture do not pose a problem.
The Flat Panel monitors are equipped with a mineral glass
screen, which provides high mechanical protection against
pressure, scratch and guarantees increased service life and
bright display clarity.
SIMATIC flat panels are available with display sizes of 12", 15"
and 19" with touch operation or as a pure display unit.
They are suited for the same mounting cutouts as the corres-
ponding Panel PCs.
Improved working quality results from:
Uniformly distributed brightness, high picture sharpness
and greatly reduced reflections
Reading angle greater than 170° horizontally and vertically
The flat panel monitors are therefore superior to conventional
CRT monitors and LCD monitors. They enable fatigue-free
working and reduce the probability of mistakes.
The flat panel monitors possess both the modern DVI-D digital
interface as well as the analog VGA interface, and can thus be
connected to existing as well as future PCs.
Flat Panel Monitors 12" 15" 19"
Resolution in pixels SVGA (800 x 600) XGA (1024 x 768) SXGA (1280 x 1024)
Touchscreen (analog/resistive) optional optional optional
Power supply 24 V DC / optional 110/230 V AC
MTBF of backlight Typically 50,000 h (at 24 h continuous operation, depending on temperature)
USB (Universal Serial Bus) only for integrated touch sensor
Graphics interface DVI-D, VGA DVI-D, VGA DVI-D, VGA
Degree of protection IP65 (front) acc. to EN 60529, NEMA 4
Vibration load during operation Tested according to DIN IEC 68-2-6: 10 to 58 Hz: 0.075 mm, 58 to 200 Hz: 9.8 m/s
2
(1 g)
Shock loading during operation Tested according to DIN IEC 68-2-29: 50 m/s
2
(5 g), 30 ms, 100 shocks
EMC CE, EN 55011, EN 61000-6-2, EN 61000-6-4
Ambient temperature during opera-
tion and at maximum configuration
+ 5 °C to + 45 °C, + 5 °C to + 50 °C in installation space, if 40°C at the front
Relative humidity Tested according to DIN IEC 68-2-3, DIN IEC 68-2-30, DIN IEC 68-2-56: 5% to 80% at 25 °C (no condensation)
Approvals CE, cULus (508) CE, cULus (508) CE, cULus (508)
Operator control unit (W x H) in mm
400 x 310 483 x 310 483 x 400
Mounting dimensions (W x H x D)
without opt. drives in mm
368 x 290 x 49 450 x 290 x 51 450 x 380 x 53
Power dissipation at maximum
configuration
25 W 25 W 55 W
SIMATIC flat panel monitors
Bright LCD monitors for industrial use
KB_Panel_PC_En.fm Seite 11 Dienstag, 17. Oktober 2006 1:59 13
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments