Siemens PC 677B Operations Instructions Page 194

  • Download
  • Add to my manuals
  • Print
  • Page
    / 259
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 193
Detailed descriptions
17.1 Motherboard
SIMATIC Panel PC 677B
194 Operating Instructions, 05/2007, A5E01035609-01
Assignment of the display to the display select pins
One of the 15 available displays is configured automatically via the display select inputs. The
display select inputs are connected to pull–up resistors, i.e. if these inputs are not
interconnected, they are high level. The input must be connected to ground to generate a
low level.
Pin no. LCD_SEL3 LCD_SEL2 LCD_SEL1 LCD_SEL0 Display type
0 low low low low reserved
1 low low low high 1280 x 1024 (SXGA), TFT, 2 x 18-bit, LVDS
channel 1 and 2
2 low low high low DVI LCD 640 x 480
3 low low high high DVI LCD 800 x 600
4 low high low low 640 x 480 (VGA), TFT, 18 bits, LVDS channel 1
5 low high low high reserved
6 low high high low 1024 x 768 (XGA), TFT, 18 bits, LVDS channel
1
7 low high high high 800 x 600 (SVGA), TFT, 18 bits, LVDS channel
1
8 high low low low reserved
9 high low low high reserved
10 high low high low reserved
11 high low high high reserved
12 high high low low 1024 x 768 (XGA), TFT, 2 x 18-bit, LVDS
channel 1 and 2
13 high high low high DVI LCD 1024 x 768
14 high high high low DVI LCD 1280 x 1024
15 high high high high No LVDS display or DVI LCD with automatic
DDC ID
I/O front port for operator panels, X44
This port carries all signals required for connecting operator panels in addition to the display
interface. The maximum cable length is 50 cm at a USB data rate of 12 Mbps.
Pin no. Short description Meaning Input / output
1 GND Ground -
2 P12V Inverter voltage supply Output
3 BL_ON Backlight on (5 V = On) Output
4 P5V_fused +5 V (fused) Output
5 GND Ground -
6 P3V3_fused +3.3 V VCC (fused) Output
7 Reserved Reserved -
8 Reserved Reserved -
9 Reserved Reserved -
10 Reserved Reserved -
11 P5V_fused +5 V (fused) Output
Page view 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 258 259

Comments to this Manuals

No comments