Siemens SPCK422 User Manual download pdf (Page 43)

SPCK420/421/422 LCD-Keypad - User Manual

User programming via the keypad > User menus > SMS

SMS

The SPC system support SMS communication from the panel to selected users’ mobile phones as well as users being able to

control the SPC system remotely via SMS. These two features work hand in hand as it allows the user to take action using the

SMS control after a SMS notification without the need to be physically at the premises.

SMS control

The SMS control can be set up so that a remote user can send a SMS message to perform the following actions at the panel:

Setting / unsetting

Enable / disable engineer

Enable / disable manufacturer access.

Mapping gate on/off.

SMS events

The SMS notification can be set up to send a range of events that occur on the system such as:

Alarm activation

Confirmed alarms

Fault & tamper

Setting & unsetting

Inhibit & isolate

All other types of events

The SMS notification can operate with a PSTN modem if the PSTN operator supports SMS over PSTN where as

SMS control will need a GSM modem at the panel. A GSM modem will support both SMS notification and control.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

No comments

Siemens SPCK422 User Manual Page 43