Siemens SPCK422 User Manual download pdf (Page 31)

SPCK420/421/422 LCD-Keypad - User Manual

User programming via the keypad > User menus > INHIBIT

INHIBIT

Zone and alerts from X-BUS devices can be manually inhibited from the keypad. Inhibiting a zone removes that zone from the

system for one alarm set period only.

To inhibit a zones or alerts from X-BUS devices:

Scroll to INHIBIT and press SELECT.1.

Scroll to the desired option in the table below and press SELECT:2.

ZONES

Select the required zone and toggle the setting from NOT INHIBITED to INHIBITED.

XBUS

Isolate the desired alert from EXPANDERS or KEYPADS:

XBUS COMMS LOST

XBUS FUSE FAULT (Expanders only)

X-BUS TAMPER

VIEW INHIBITS

To view a list of the inhibited zones, system alerts and E-BUS devices alerts.

Only the ALARM, EXIT/ENTRY, FIRE EXIT and LINE zone types can be inhibited on the SPC system. All other

zone types are not displayed in the inhibit menus.

If the security grade setting of the SPC system is set to Unrestricted (see page), then the option to inhibit zones

and fault conditions is displayed in the engineer inhibit menus.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

No comments

Siemens SPCK422 User Manual Page 31