Siemens SCALANCE X-200 Specifications download pdf (Page 32)

Connecting

4.4 Fitting the IE FC RJ-45 Plug

SCALANCE X-300

32 Operating Instructions, 01, A5E01113043

Wall mounting

The device is grounded by the securing screw in the unpainted hole.

Please note that IE Switches X-300 must be grounded over one securing screw with

minimum resistance.

If an IE Switch X-300 is mounted on a non-conducting base, a grounding cable must be

installed. The grounding cable is not supplied with the device. Connect the paint-free surface

of the IE Switch X-300 to the nearest grounding point using the grounding cable.

4.4 Fitting the IE FC RJ-45 Plug

Assembly of the IE FC RJ-45 Plug on an IE FC Standard Cable

For information on assembling an IE FC RJ-45 Plug on a SIMATIC NET Industrial Ethernet

FastConnect cable, please refer to the instructions supplied with the IE FC RJ-45 Plug.

Inserting the IE FC RJ-45 Plug

1. Insert the IE FC RJ-45 Plug until it locks in place in the twisted pair port of the IE Switch

(on a 1000 Mbps gigabit Ethernet port, the RJ-45 plug can only be used for 100 Mbps).

Figure 4-1 Inserting the IE FC RJ-45 Plug (based on the example of the IE FC RJ-45 Plug 180)

The flush fit and locking mechanism of the PROFINET-compliant IE FC RJ-45 Plug along

with the securing collar on the TP port of the IE Switch guarantee a robust node connection

suitable for industrial conditions providing tensile and bending strain relief for the twisted pair

socket.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 68 69

No comments

Siemens SCALANCE X-200 Specifications Page 32