Siemens Gigaset SL55 Specifications download pdf (Page 39)

38

Handset settings

Gigaset SL550 / IM MEA Englisch / A31008-M1710-A601-1-7619 / registr_sett.fm / 10.11.05

Setting display illumination

Depending on whether the handset is in

the charging cradle or not, you can acti-

vate or deactivate the display illumination.

If the charging cradle is switched on, the

display is permanently dimmed.

w

¢ Ð ¢ Display ¢ Backlight

The current setting is displayed.

¤ Change multiple line input:

In Charger

Select On or Off.

without Charger

Select On or Off.

§Save§ Press the display key.

a Press and hold (idle status).

Activating/deactivating

auto answer

If you have activated this function, when

you get a call you can simply lift the hand-

set out of the charging cradle without hav-

ing to press the talk key c.

w

¢ Ð ¢ Handset

Auto Answer

Select and press

§OK§ (=on).

a Press and hold (idle status).

Adjusting the loudspeaker

volume

You can set the loudspeaker volume for

handsfree speaking to five different levels

and the earpiece volume to three different

levels. You can only make these adjust-

ments during an external call.

The handsfree volume can only be

adjusted when this function is set.

You are conducting an external call.

t Press the control key.

r Select volume.

§Save§ Press display key if necessary

to save the setting perma-

nently.

Changing ringtones

u Volume:

You can choose between five volumes

(1–5; e.g. volume 2 = ˆ) and

the "Crescendo" ring (6; volume

increases with each ring =

‰).

u Ringtones:

You can select 10 different melodies or

any sound from My stuff (page 39).

You can configure the following functions

with different ringtones:

u Ext. Calls : for external calls

u Internal Calls : for internal calls

u Appointments : for set appointments

(page 41)

u All: the same for all functions

Settings for individual functions

Set the volume and melody depending on

the type of signalling required. With exter-

nal calls, you can also set the phone so

that it announces the name of the caller

after the first ring. However, the relevant

voice pattern must have been previously

recorded (page 20).

w

¢ Ð ¢ Audio Settings ¢

Ringer Settings

q Select setting, e.g. Ext. Calls

and press

§Save§.

r Set volume (1–6).

s Scroll to the next line.

r Select melody.

s Only in

Ext. Calls setting: scroll to the

next line.

Note:

When set to On the handset's standby time is

reduced considerably.

‰

1 ... 38 39 40 ... 62

Comments to this Manuals

No comments