Siemens Gigaset S2 Professional Operations Instructions download pdf (Page 10)

Step by Step

Conducting calls – the basic functions

Activating/deactivating the handset

a Press the On-hook key until the activation or deactiva-

tion is confirmed by a crescendo tone sequence.

If the default PIN has not been changed (0000), the

handset is ready for operation as soon as it is switched

on. If a PIN was set, it must be entered before the hand

set can be operated.

Displaying the connection quality

The strength of the incoming signal is displayed by the

"receive field strength" icon in on or message status:

The radio range is different indoors and outdoors

(

Æ page 112 ). Please consult your system administrator

in the event of range problems.

Charging batteries

The handset charges when sitting in the charging shell,

even when deactivated. The charging status is shown

on the display.

If the handset deactivates because the batteries are

flat, it automatically reactivates and is ready for opera-

tion as soon as you place it in the charging shell. The

charging operation starts. If a PIN was set, it must be

entered first to allow charging to start.

Language

If your preferred language for the display texts is not

set, you can set this yourself (Æ page 18).

No receive field strength

Low receive field strength

50% receive field strength

100% receive field strength

1 ... 9 10 11 ... 126

No comments

Siemens Gigaset S2 Professional Operations Instructions Page 10