Siemens RDG400KN User Manual download pdf (Page 28)

28 / 44

Siemens Flush-mount room sensors AQR253... AQR257... CE1P1411en

Building Technologies GAMMA building management systems 2013-04-17

Object Name in ETS I/O

Data point type KNX Value range

Index ID Format Unit

Input 1 – up/down 45

Input 1/2 – up/down

I, O 1.008 1 bit --- 0 = Up / 1 = Down

Input 1 block 46

Input 1/2 block

I 1.003 1 bit --- 0 = Enable / 1 = Disable

State contact 2 O 1.001 1 bit --- 0 = Off / 1 = On

Input 2 - switch I, O 1.001 1 bit --- 0 = Off / 1 = On

Input 2 – send value I, O 5.001

5.010

1 byte %

---

0…100% (scaled from 0 to 255)

0…255

Input 2 – switch 2 I, O 1.001 1 bit --- 0 = Off / 1 = On

Input 2 – send value 2 I, O 5.001

5.010

1 byte %

---

0…100% (scaled from 0 to 255)

0…255

Input 2 - switch I, O 1.001 1 bit --- 0 = Off / 1 = On

Input 2 - dim I, O 3.007 4 bit --- 1 = Darker / 9 = Brighter /

0, 8 = Stop

Input 2 – stopstep I, O 1.007 1 bit --- 0 = Step up / 1 = Step down

Input 2 – up/down I, O 1.008 1 bit --- 0 = Up / 1 = Down

56 Input 2 block I 1.003 1 bit --- 0 = Enable / 1 = Disable

A, B, C, D, E, F, G, H)

Not all objects at the same time:

For both inputs 1/2 only B, C, or D in case of combined function.

Per input only A, B, C, or D; and E, F, G, or H simultaneously in case of single function.

6.3.6 Fault information

Base module AQR2570 / AQR2576

Object Name in ETS I/O

Data point type KNX Value range

index ID Format Unit

Fault information O 219.001 6 bytes --- [0...255 ] = Log no.

[0...2] = Alarm priority

[0...14] = Application area

[0...4] = Fault class

[0...7] = Attribute

[0...7] = Fault state

Information on generated fault.

Fault state O 1.001 1 bit --- 0 = Normal / 1 = Faulty 60

Global fault indication. State is “Faulty” if another fault appears.

Fault – configuration O 1.001 1 bit --- 0 = Normal / 1 = Faulty 61

The state changes to “Faulty” if another but the connected front module type was configured. If the front module contains at

least the sensors as configured, no fault is generated..

See sensor for sensor faults.

I/O: Input/output

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Comments to this Manuals

No comments

Siemens RDG400KN User Manual Page 28

Comments to this Manuals

Related products and manuals for Thermostats Siemens RDG400KN