Siemens Gigaset C34 User Manual download pdf (Page 13)

12

Handset settings

Gigaset C34 / ISR eng / A31008-M1607-B501-1-7619 / start_guide_time.fm / 22.3.05

During the call, all keys are locked except

the end call key. The room monitor

function remains active after you end the

call. It must be activated again if the hand-

set has been switched off.

When the function is activated, incoming

calls are signalled on the handset without

a ring tone and only appear on the

display. The display and keys are not illu-

minated and advisory tones are also

turned off.

Activating the room monitor and

entering the number to be called

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Call Internal

s / ~ Depending on the base, select

internal handset or Call All (if

several handsets are regis-

tered and you want all of them

to be called) and press

§OK§ or

enter the handset's number

manually and press

§OK§.

The function is now activated. An internal

handset will be called.

Or:

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Call External

~ Enter the number of an exter-

nal phone and press

§OK§.

The function is now activated. An exter-

nal number will be called.

Setting the sensitivity

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Level

s Choose between Low and High

and press

§OK§.

Deactivating the room monitor

§Menu§ Press the control key.

s Select Room Monitor off and

press

§OK§.

The function is deactivated.

Deactivating the room monitor

remotely

Important: The telephone must support

touch tone dialling.

¤ Take the call from the room monitor

and press keys 9 ;.

The room monitor function will deactivate

after the call ends. There will be no further

room monitor calls.

Handset settings

Your handset is preconfigured, but you

can change the settings to suit your indi-

vidual requirements.

Changing the display language

You can view the display texts in different

languages.

§Menu§ ¢ Settings ¢ Handset ¢ Language

The current language is indicated by ‰.

q Select a language and

press

§OK§.

a Press and hold (idle status).

Caution!

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answering machine.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

– The active room monitor function consider-

ably reduces the operating time of the

handset. Place the handset in the charging

cradle if necessary. This ensures that the

battery does not discharge.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Comments to this Manuals

No comments