Siemens Gigaset A580 User's Guide download pdf (Page 39)

38

Base station settings

A580 / IM-NORD EN / A31008-M2006-R201-1-SM19 / registr_sett.fm / 02.06.2008

Version 4, 29.10.2007

Base station settings

The base station settings are carried out

using a registered Gigaset A58H handset.

Protecting against unauthorised

access

Protect the system settings of the base sta-

tion with a PIN known only to yourself.

You may have to enter the system PIN into

the base station when manually register-

ing a handset.

Changing the system PIN

You can change the base station's 4-digit

default system PIN ("0000") to a 4-digit

PIN known only to yourself.

§Menu§ ¢ Settings ¢ Base ¢ System PIN

~ Enter the old system PIN and

press

§OK§. For security, the PIN

is shown as four stars (

****

).

~ Enter your new system PIN

and press

§OK§.

a Press and hold (idle status).

Resetting the system PIN

If you have forgotten the system PIN, you

can reset it to the original code 0000 by

resetting the base station to its default set-

tings. This will also reset every other

setting, see "Restoring the base station to

the factory settings"

¢ page 38.

Repeater support

With a repeater you can increase the range

and reception strength of your base sta-

tion. You will need to activate repeater

mode. This will terminate any calls that

are in progress at the time.

Precondition: A repeater is registered.

The Eco Mode / Eco Mode+ mode is deac-

tivated.

§Menu§ ¢ Settings ¢ Base

¢ Additional Features ¢ Repeater Mode

§Yes§ Press the display key.

When repeater mode is active, the menu

item is marked with .

Restoring the base station to the

factory settings

When restoring factory settings:

u Handsets are de-registered

– When resetting via the menu:

all Gigaset handsets

– When resetting using the key on

the base station: also all handsets

of other GAP capable devices

u Individual settings are reset

u All lists are deleted

u The system PIN is reset to the original

code 0000

u Eco Mode+ is deactivated

Only the date and time are retained.

Resetting the base station via the

menu

§Menu§ ¢ Settings ¢ Base ¢ Base Reset

§OK§ Press the display key to

confirm.

Resetting the base station using a key

on the base station

¤ Disconnect the power cord from the

base station.

¤ Hold down the registration/paging key

(

¢ page 1) on the base station while

reconnecting the power cable to the

base station. Release the key after

approximately 5 seconds.

The base station has now been reset.

Please note

Repeater support and Eco Mode / Eco

Mode+ (

¢ page 32) cancel each

other out, i.e. both functions cannot

be used at the same time.

‰

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 52 53

Comments to this Manuals

No comments