Siemens Gigaset 2015 Operations Instructions download pdf (Page 41)

Internal consultation and call transfer

Gigaset 2015, GBR: A30852-X-1105-B301-1-7619

KAP08.FM4

4.8.99

Operation in connection with a PBX

During an external call you can consult with another

station user connected to your telecommunications

system (PBX). In such cases note carefully the operating

instructions for the telecommunications system and also

the section “Setting the signalling method” in these

instructions (➔ page 12).

Terminating consultation/continuing external call

Call transfer

Operation with several mobile units

If a number of mobile units are in operation (➔ page 57),

you can transfer an external call to an internal station user.

Initiate consultation. You hear dial tone. The external call

is held.

Enter the number of the required station. The user is

called.

Terminate internal consultation. You are reconnected to

the external subscriber.

Press the internal key and then enter the number of the

required mobile unit (1 to 6). You hear internal ringing

tone. The mobile unit is called. The external call is held.

either

Wait until the internal party answers. Inform this user

about the outside call.

Transfer the external call.

Instead of waiting until the called party answers, transfer

the call directly.

Instead of pressing

a you can replace your

mobile unit in the charger unit.

If you transfer the external call directly and the

user fails to take the call within 30 seconds, you

are recalled.

If you transfer the external call directly and the

user is busy, you are recalled immediately.

If you take the recall, you are reconnected to the

external subscriber. A recall is taken in the same

way as any other type of call (➔ page 20).

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 85 86

No comments

Siemens Gigaset 2015 Operations Instructions Page 41