Siemens Gigaset 2015 Operations Instructions download pdf (Page 61)

The answering machine

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

kap12.fm5

29.10.99

Initiating remote operation

In order to operate the answering machine remotely, you

must first activate the remote function.

From the handset

From another telephone with DTMF-capability

Press the keys on the handset in order to call the

answering machine. This results in output of a “ready

tone”, the mode of operation, the current number of

messages in storage, and (if applicable) the day and

the time.

You call your own number from a remote station. If the

DID function is activated, you hear a high multiple tone.

The answering machine switches on after 5 seconds.

After the message, press the pound key and enter the

system code via the telephone’s dialling keypad. For

checking purposes, the telephone outputs a stand-by

tone, the operating mode, the current number of mes-

sages saved as well as the relevant weekday and time.

If you enter the incorrect system code, the an-

nouncement "Faulty PIN" is output at the tele-

phone. You can then re-enter the system code.

The connection is automatically cleared down

after the third incorrect attempt.

Remote operation and DID from another tele-

phone are only possible if a system code which

is different from the default system code has

been programmed (➔ page19).

Remote operation is still possible even if the an-

swering machine has been switched off. In this

case you simply continue ringing until the an-

swering machine responds.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

No comments

Siemens Gigaset 2015 Operations Instructions Page 61