Siemens Simatic PC Panel PC 870 Service Manual download pdf (Page 35)

SIMATIC Panel PC 670/870 Commissioning Instructions 3–1

A5E00135748-01

3 Setting Up and Operating

Panel PC 670/870

3.1 Initial Startup and Normal Operation

The operating system is installed on the hard disk.

Checklist before startup

Before startup, go through the following checklist:

• Have you considered the environmental conditions of the Panel PC 670/870

and the peripheral devices connected?

• Are the peripheral devices connected properly and have all the required

presettings been made?

Caution

Risk of damage to the Panel PC 670/870.

Ensure that no condensation is formed on or in the device when transporting it

during cold weather periods or when it is exposed to extreme temperature

fluctuations.

Before commissioning, the device must be brought slowly to room temperature.

In case of condensation, wait approximately 4 hours before switching on the

device.

Activation

After connecting the peripheral devices and the system unit, the mains power

can be applied to the Panel PC 670/870.

Connect the Panel PC 670/870 to the mains. The green power LED lights up.

Initial startup

After connection to the mains, the Panel PC 670/870 performs a self-test.

During the self-test, the message

Press <F2> to enter SETUP appears

briefly.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Siemens Simatic PC Panel PC 870 Service Manual Page 35