Siemens Sinumerik 810T User Manual download pdf (Page 70)

6 PLC Signals 11.90

6.9.4 Function block FB 65: M STACK and function block FB 66: STACK M

6.9.4 Function block FB 65: M

STACK and

function block FB 66: STACK

FB 65

Error number ”F1” in Accu 2 means:

Stack pointer overflow on entering flag

FB 66

Error number ”F1” in Accu 2 means:

Stack pointer too low on removing flag

Note: Maximum nesting depths = 8. If nesting depth >8,

PLC alarm 6114 appears

6.9.5 Function block FB 190

Name: K-LEITPC

D, KH --

D, KY --

A, BY --

ADPR

DBDW

RI/A

MELD

Parameter description of function block FB 190

ADPR Initial address in the DUAL PORT RAM: is not evaluated! (This is on the SIMATIC

side only for reasons of compatibility to the FB 190)

DBDW High byte: Data block number

Low byte: Number of initial word and at the same time initial address in the

link area

RI/A High byte: Transfer direction

0 = Transfer in direction of link area

1 = Transfer in direction of data block

Low byte: Quantity of words to be transferred (<127)

MELD Error messages: 1 Interface fault

(PLC does not change to STOP) 2 DB not available

3 DB too small

4 DB in EPROM

5 0 < data value > 127

6 Wrong direction

255 No fault (FF)

6-26

SINUMERIK 810 GA3/820 GA3 (IA)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 101 102

Comments to this Manuals

Aryan 05 Mar 2024 | 18:54:21

Alarm 6027

Aryan 05 Mar 2024 | 18:55:02

Aaaa

Siemens Sinumerik 810T User Manual Page 70

Comments to this Manuals

Related products and manuals for Networking Siemens Sinumerik 810T