9
Step 3 –
Select a hearing
instrument
Open the Hearing Instrument selection page
in CONNEXX. It is possible to automatically
detect and read out a connected hearing
instrument or to manually select and simulate a
hearing instrument.
If a hearing instrument is selected, Fitting
Preview will show the appropriate fitting
range of the respective instrument with the
patient‘s individual audiogram if available.
Step 1 –
Start CONNEXX
®
In stand-alone mode, doubleclick the
CONNEXX® icon to start CONNEXX fitting
software. Under the NOAH™ module selection
dialog, the Siemens icon provides access
to CONNEXX.
Step 2 –
Connect miniTek
Prior to fitting the connected hearing
instruments together with miniTek in
CONNEXX, attach miniTek to the PC via USB.
Note: When removing miniTek from the cable, wait at
least 2 seconds before reconnecting it to the PC.
If a hearing instrument fitting is simulated in
CONNEXX, select “Simulation mode”
for miniTek.
CONNEXX6
How to activate miniTek.
Comments to this Manuals