Siemens miniTek User Manual download pdf (Page 15)

Step 6 –

Pairing miniTek with

Bluetooth wireless

technology enabled

phones

Pairing with telephones and other Bluetooth

enabled devices (e.g. MP3 Players,

Notebooks, etc.):

1. Press the

„

Telephone“ button for 5 seconds

until the integrated LED is blinking to indicate

that miniTek is in pairing mode.

2. Activate

„

Bluetooth“ in the desired Bluetooth

enabled telephone and search for available

devices. miniTek will appear as “RCU Connect“.

3. Add miniTek to the list of known devices.

miniTek is now ready to receive calls from this

telephone. If prompted, the PIN Code “0000“

can be entered into the telephone.

4. If desired, up to two different BT enabled

phones may be paired for

use with miniTek.

miniTek Input modes –

miniTek Telecoil

miniTek Telecoil is intended for use with induction

loop systems (e.g. in theaters or churches). It

enables smaller hearing instruments which do not

have a telecoil (such as Siemens Life or Pure) to take

advantage of induction loop systems.

timiniTek Telecoil only“:

indicates that the hearing instrument microphone

will be deactivated and that only induction loop

signals sent via the miniTek will provide input. In

this case, the miniTek Telecoil volume level can

be adjusted.

timiniTek Telecoil and microphone“: indicates

that both the hearing instrument microphone and

induction loop systems via the miniTek will provide

input signals to the hearing instrument; both signal

volumes can be adjusted independently. By default,

the microphone level in mixed mode

is reduced by –12 dB.

“Accessible manually“ allows the wearer to access

the program via push button or remote control. By

default, this option is deactivated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Siemens miniTek User Manual Page 15

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Siemens miniTek