Siemens SOMATOM Sensation Cardiac Version A60 Operations Instructions download pdf (Page 18)

General

Workflow

Auto Load in 3D and Postprocessing Presets

You can activate the “Auto load in 3D” function on the

Examination Card/Auto Tasking and link it to a recon

job. For example, the 2

recon job with thinner slice

width in some of the examination protocols. If the post-

processing type is chosen from the pull down menu,

the reconstructed images will be loaded automatically

into the 3D Card on the Navigator with the corres-

ponding postprocessing type.

On the 3D Card you have the possibility to create for

MPR and MIPthin Range Parallel and Radial protocols

which can be linked to a special series.

For example, if you always do some sagittal Multipla-

nar Reconstructions for a Spine examination, you load

once a Spine examination into the 3D Card. Select the

image type (MPR, MIPthin), select the orientation

and open the Range Parallel function. Adapt the range

settings (Image thickness, Distance between the

images etc.) and hit the link button. From now on, you

have a predefined postprocessing protocol, linked to

the series description of a Spine examination.

Exactly the same can be done for VRT presets. In the

main menu, under Type/VRT Definition, you can link

VRT presets with a series description.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 127 128

No comments

Siemens SOMATOM Sensation Cardiac Version A60 Operations Instructions Page 18