Siemens Hicom 300 E User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
3
Optiset E Analog Adapter
The Analog Adapter lets you attach a standard analog device,
such as a phone, facsimile machine, modem, or answering
machine, to your phone via an RJ11 connector on the back of
the adapter. The attached device is configured at your
communications server to be completely independent, with its
own phone number. It can be attached to a standard telephone
cable up to 300 ft. long. This adapter requires the Optiset E
Local Power Supply for operation. (See Optiset E Local Power
Supply on page 6.)
Optiset E Data Adapter
The Data Adapter lets you connect your phone to a computer or
terminal via a 25-pin connector for an EIA-232-E cable. You
can make asynchronous data calls by issuing AT commands
from your attached PC or terminal to your phone, much as you
would to an attached modem. This adapter supports baud rates
of up to 38.4 kilobytes per second (autobaud detection),
simultaneous voice and data communication, hardware flow
control (RTS/CTS) and full duplex operation. It also supports
the Siemens Application Programming Interface (API), data
loopback for customer service tests, and V.120 and DMI mode
2-Bit Rate Adaptation.
Optiset E ISDN Adapter
The ISDN Adapter lets you connect ISDN S0 bus devices such
as phones, PC cards, LAN Bridges, G4 fax machines, and video
equipment to your phone via an RJ45 connector. It supports up
to 64 kilobytes per second simultaneously on each bearer
channel. It will only work properly in a primary phone, not in a
phone attached to another phone with the Phone Adapter. You
can only connect two ISDN devices to the adapter.
Optiset E Phone Adapter
The Phone Adapter lets you attach another Optiset E phone to
your Basic phone. It provides an RJ11 connector to which you
can attach the second phone via a standard telephone cable up
to 300 feet long. You can then place the second phone in an area
not wired for a phone. The attached phone is configured at your
communications server to be a completely independent phone
with its own phone number.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments