Siemens Hicom 300 E User Manual download pdf (Page 28)

Station Speed Dialing

Station Speed Dialing lets you assign frequently used dialing

sequences (extensions, outside numbers, or feature access

codes) to each of ten single-digit codes (0 through 9). You can

then dial a single-digit code instead of the entire sequence. You

can also be set up at the communications server for up to 30

codes, in groups of 10. If you are set up for more than ten, they

follow a double-digit scheme (00 through 29).

To set up a station speed code,

Press the Station Speed (SPEED) key

twice, or get a dial tone and dial

# #

2. Enter the station speed code.

3. Enter the dialing sequence. Then hang up.

To dial using a station speed code,

1. Press the Station Speed (SPEED) key.

2. Listen for the confirmation tone.

3. Dial the station speed code.

1. Get a dial tone.

2. Dial # 3 and then the station speed code.

SPEED SPEED

SPEED

1 2 ... 23 24 25 26 27 28 29 30 31 32

No comments

Siemens Hicom 300 E User Manual Page 28