Siemens Hicom 300 E Operations Instructions download pdf (Page 47)

Using HiPath 4000 as a intercommunication system

Step by Step

System-wide voice-calling

From your telephone, you can voice call any internal

user whose telephone has a speakerphone function or

a loudspeaker.

A destination subscriber is voice called via his or her in-

ternal call number.

Lift the handset.

Enter the system code number for “voice calling” and

the internal call number of the user.

Press the “voice calling” key (must be installed before-

hand)

and

enter the internal call number of the user.

An immediate connection is made to the destination

loudspeaker if

• there is no busy condition

• the handset has not been lifted

• and voice-calling protection has not be activated

The calling party will hear a confirmation tone indicating

that the connection has been set up and that he or she

can start talking.

The called party can accept the call by lifting the handset.

If the called party presses the loudspeaker key or the

line key (if installed), the connection is aborted.

Enter the code!

The number of possible voice calls is the same as

the number of possible normal calls.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 57 58

No comments

Siemens Hicom 300 E Operations Instructions Page 47