Siemens Hicom 300 E Operations Instructions download pdf (Page 43)

Using a different telephone in the same way as your own

Step by Step

Using a different telephone

in the same way as your own

You can log on to another telephone belonging to the Hi-

com system by means of a personal identification num-

ber (PIN) (as of software status HiPath 4000, Version 1.0

und Hicom 300 E/300 H, and also telephones of net-

worked HiPath 4000 systems, e.g. at other branches of

your company). At the other telephone you can then:

• make calls and assign the charges to cost centres

• use your individual speed dialling numbers and also

a number which has been stored at your own tele-

phone for the purpose of redialling.

In addition, you can have your calls diverted to a tele-

phone in the office or department where you will be for

a temporary period ("call forwarding - follow me").

Logging on to a different telephone

Precondition: You have been assigned a PIN by Sys-

tem Support. You require an internal PIN for calls within

your own HiPath 4000 system, while for calls involving

other HiPath 4000 systems in the integrated network

you require a "network-wide" PIN.

Lift the handset.

qie

UK code or Standard code (for PIN 1).

or Enter the code for additional PIN.

Entering the PIN for your own HiPath 4000 system

area:

Enter internal PIN.

or Entering the PIN for another HiPath 4000 system

area within the integrated network:

Enter the 2-digit node code for your own HiPath 4000

system (enquire with System Support).

Enter your own number and press the square key.

Enter the network-wide PIN and press the square key.

Enter the code!

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

No comments

Siemens Hicom 300 E Operations Instructions Page 43