Siemens Gigaset SL400 Specifications download pdf (Page 66)

65

Using a handset as a room monitor

Activating the room monitor and

entering the destination number

v ¢ É ¢ Room Monitor

¤ You can enter data in the following fields:

Activation:

Select On to activate.

Alarm to:

Select Internal or External.

External number: Select the number

from the directory (press display key

ö)

or enter it manually.

Internal number: Select display key

§Change§ ¢Select handset or Call All to

call all registered handsets

¢ §OK§.

In idle status, the destination number or

the internal destination number is dis-

played.

Sensitivity:

Select noise level sensitivity (Low or

High).

¤ Press §Save§ to save the settings.

When the room monitor function is activated,

the idle display appears as shown below:

Changing the set destination

number

v ¢ É ¢ Room Monitor

¤ Enter and save number as described in

"Activating the room monitor and enter-

ing the destination number"

(

¢ page 65).

Cancelling/deactivating the room

monitor

Press the end call key a to cancel the call

when the room monitor is activated.

In idle status, press the display key

§Off§ to

deactivate room monitor mode.

Deactivating the room monitor

remotely

Prerequisites: The phone must support tone

dialling and the room monitor should be set

for an external destination number.

¤ Accept the call from the room monitor

and press keys 9 ;.

The room monitor function will deactivate

after the call ends. There are no further room

monitor calls. The other room monitor set-

tings on the handset (e.g., no ringtone) will

remain activated until you press the display

key

§Off§ on the handset.

To reactivate the room function with the

same phone number:

¤ Reactivate and save with §Save§

(

¢ page 65).

Warning!

u Always check the operation of the

room monitor before use. For exam-

ple, test its sensitivity. Check the

connection if you are diverting the

room monitor to an external

number.

u When the function is switched on, the

handset's operating time is considera-

bly reduced. If necessary, place the

handset in the charger. This ensures

that the battery does not run down.

u Ideally the handset should be posi-

tioned 1 to 2 metres away from the

baby. The microphone must be

directed towards the baby.

u The connection to which the room

monitor is diverted must not be

blocked by an activated answering

machine.

i Ã V

07:15

INT 1 05 Apr

Á

Room monitor

0891234567

Off Options

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 96 97

Comments to this Manuals

No comments