Siemens TL.. Operations Instructions download pdf (Page 28)

Application

3.13 Storage

For the storage of the inverter units, the following conditions must be strictly observed.

• The inverters are intended for indoor installation in a clean and dry environment.

• They must be protected against temperature extremes (min. 25°C and max. 70°C) and

excessive humidity (max. 85%).

In the event of ingress of dirt or liquid into the equipment, formation of condensation, damage or any

other failures to comply with the prescribed storage conditions, the equipment must not be commissioned

until the correct remedial procedure has been discussed with and approved by Siemens AG. In the case

of noncompliance with the above, Siemens AG will not accept liability for damage arising from

unauthorized commissioning.

Note

Risk to life! Unauthorized commissioning!

Cabinets which have been stored in conditions that do not meet the prescribed standard must not be commissioned. Failure

to comply with storage standards may result in electric shock, other serious injury or substantial property damage.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 60 61

No comments

Siemens TL.. Operations Instructions Page 28