Siemens FC10 Operations Instructions download pdf (Page 30)

Troubleshooting

Siemens Building Technologies 007995_a_en_--.doc

Fire & Security Products 04.2004

7 Troubleshooting

This section provides you with information in case of a system disturbance, or

when the system is not in normal operation. The table below provides a list of pos-

sible faults with notes on possible causes.

Fault Cause/Remedy

LED 'Fault' is flashing Fault in the system

1. Check whether another yellow LED is

flashing.

2. If no other yellow LED is flashing, contact

the service technician.

LED 'Fault power supply'

is flashing

Fault in the power supply

1. Check the external mains fuse.

2. When the mains fuse is in order, contact

the service technician.

Yellow zone LED is

flashing

Fault in a zone

3. Check whether all detectors are inserted.

4. If all detectors are inserted and the yellow

LED keeps flashing, contact the service

technician.

LED 'Earth fault' is flash-

ing

LED 'Fault control unit' is

flashing

LED 'Fault alarm horn' is

flashing

LED 'Fault controls' is

flashing

LED 'Remote transmis-

sion fault' is flashing

LED 'RT alarm' is flash-

ing

Contact the service technician

The indicator module

indicates: '88.88' (point is

flashing)

Clock not set (see section 'Setting date and

time')

The indicator module

indicates: '.'

(point is flashing)

Fault in the power supply

5. Verify whether the mains supply is avail-

able.

6. Contact the service technician.

Tab. 6 Troubleshooting

When you cannot remedy a fault by means of these operating instructions, contact

the service technician.

1 2 ... 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Siemens FC10 Operations Instructions Page 30

Comments to this Manuals

Related products and manuals for Fire protection Siemens FC10