Siemens SN26N291EU Operations Instructions download pdf (Page 8)

en

8

As soon as the rinse-aid refill indicator H

is lit on the fascia, there is still a rinse-aid

reserve of 1 – 2 rinsing processes. Refill

with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only rinse

aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH, 26° Clarke,

3.7 mmol/l) only. If the water hardness is

over 21° dH, rinse aid must be used.

–Open the dispenser 1b by pressing

and lifting the plate on the cover.

– Carefully pour rinse aid up to the max.

mark in the filler opening.

– Close cover until it clicks shut.

– To prevent excessive foam formation

during the next rinse cycle, remove any

rinse aid which has run over with a

cloth.

Setting amount of rinse aid

The amount of rinse aid dispensed can be

set from §:‹‹ to §:‹‡. This is the factory

setting §:‹†.

Do not change the amount of rinse aid

unless streaks (select lower setting) or

water stains (select higher setting) are left

on the utensils.

– Close the door.

– Switch on ON/OFF switch (.

– Hold down programme button # and

press START button h until •:‹.... is

indicated on the digital display.

– Release both buttons.

The LED for button # flashes and the

digital display )* displays the factory

setting •:‹….

– Press programme button # until the

factory set value §:‹† is indicated on

the digital display )*.

To change the setting:

– Press programme button 3.

Each time the button is pressed, the

set value increases by one level; when

the value of §:‹‡ has been reached,

the display jumps back to §:‹‹ (off).

– Press START button h.

The set value is saved.

Switching off rinse aid refill

indicator

If the rinse-aid refill indicator H is

impaired (e.g. when using combined

detergents containing rinse aid

component), it can be switched off.

– Proceed as described under “Setting

amount of rinse aid” and set the value

to §:‹‹.

The rinse aid refill indicator H is now

switched off.

Rinse aid

max

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments