Siemens SN26N291EU Operations Instructions download pdf (Page 6)

en

6

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above 7° dH (from set value

•:‹‚) must be softened. The water is

softened with salt (regeneration salt) in the

water softening system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Setting

The amount of salt dispensed can be set

from •:‹‹ to •:‹ˆ.

Salt is not required at the set value •:‹‹.

– Find out about the hardness value of

your tap water. Your water utility

company will help you with this.

– Set value can be found in the water

hardness table.

– Close the door.

–Switch on ON/OFF switch (.

– Hold down programme button # and

press START button h until •:‹.... is

indicated on the digital display.

– Release both buttons.

The LED for button # flashes and the

digital display )* displays the factory

setting •:‹….

To change the setting:

– Press programme button 3.

Each time the button is pressed, the

set value increases by one level; when

the value of •:‹ˆ has been reached,

the display jumps back to •:‹‹ (off).

–Press START buttonh.

The chosen setting has now been

stored.

Water hardness table

Water softening system

•:‹‹

•:‹‚

•:‹ƒ

•:‹„

•:‹…

•:‹†

•:‹‡

•:‹ˆ

Water

hardness

value

°Clarke

soft

medium

hard

0‒8

9‒10

11‒12

13‒15

16‒20

21‒26

27‒38

39‒62

mmol/l

0‒1.1

1.2‒1.4

1.5‒1.8

1.9‒2.1

2.2‒2.9

3.0‒3.7

3.8‒5.4

5.5‒8.9

Set value

on the

machine

Hardness

range

hard

hard

medium

medium

soft

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments