Siemens IGWIPS200-1 User Manual download pdf (Page 11)

IGWiPS200-1

Changes or modifications not expressly approved by Siemens will void the user’s authority to operate the

equipment.

This product is intended for fixed installation applications. In order to comply with FCC/ISC adopted RF exposure

requirements, installation of this transmitter system’s antenna must be performed in a manner that will provide at

least a six foot (2m) clearance from the front radiating aperture to any user or member of the public.

FCC 47CFR15.247

ISC RSS 210

UL Class I, Div. 2 (Groups A,B,C,D)

CSA HAZARDOUS LOCATION PRECAUTIONS

This section provides CSA hazardous location precautions that should be observed by the user when installing or

servicing the equipment described in this Instruction. These statements supplement those given in the preceding

section.

Precautions - English

For Class I, Division 2 hazardous locations:

• Use only factory-authorized replacement parts. Substitution of components can impair the suitability of this

equipment for hazardous locations.

For Division 2 hazardous locations:

• When the equipment described in this publication in installed without safety barriers, the following precautions

should be observed. Switch off electrical power at its source (in non-hazardous location) before connecting or

disconnecting power, signal, or other wiring.

Précautions - Français

Emplacements dangereux de classe I, division 2:

• Les pièces de rechange doivent être autorisées par l'usine. Les substitutions peuvent rendre cet appareil

impropre à l'utilisation dans les emplacements dangereux.

Emplacement dangereux de division 2:

• Lorsque l'appareil décrit dans la notice ci-jointe est installé sans barrières de sécurité, on doit couper

l'alimentation électrique a la source (hors de l'emplacement dangereux) avant d'effectuer les opérations

suivantes branchment ou débranchement d'un circuit de puissance, de signalisation ou autre.

ENVIRONMENTAL CONSIDERATIONS

Operate each device within its environmental specifications to help ensure reliable, trouble-free operation with

minimum down time. Refer to the Specifications section for operating temperatures limits, operating humidity, and

maximum moisture content.

CAUTION

Exceeding the specified operating temperature limits can adversely affect performance and

may cause damage to the instrument.

May 2007 9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

No comments

Siemens IGWIPS200-1 User Manual Page 11