Siemens MC35 User Manual download pdf (Page 33)

Remote-SAT User's Guide

MC35_SAT_01_v02.00 Page 33 of 65 11.01.2002

1.4.10 AT^SSTGI Remote-SAT Get Information – Display Text (33)

Write command

AT^SSTGI=33

This command is to be used upon receiving an unsolicited result code

^SSTN:33.

The TA is being passed a message to display to the user, which can have

different display characteristics.

Text and an Icon Identifier can be passed to the TA to display to the user.

Response

^SSTGI: <cmdType>, <commandDetails>, <text>, <immediateResponse>,

Parameters

<cmdType> 33 – Proactive command ID, see Table 1

<commandDetails> Unsigned Integer, range 0 – 255, used as a bitfield.

bit 1: 0 = normal priority

1 = high priority

bits 2-7: = RFU

bit 8: 0 = clear message after a delay

1 = wait for user to clear message

<text> String to be displayed (up to 240 bytes)

<immediateResponse> Indicates when to send TERMINAL RESPONSE

0 = send TERMINAL RESPONSE when text

clears from screen

1 = TERMINAL RESPONSE sent immediately

<iconQualifier> Unsigned Integer, range 0 – 255, used as a bitfield.

bit 1: 0 = icon is self explanatory and replaces text

1 = icon is not self-explanatory and shall be

displayed with the text

Determined value only if associated icon id is

not 0 (an icon exists).

bits 2-8: = RFU

<iconId> 0-255, 0: no icon

Reference

Siemens

Note

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 64 65

No comments

Siemens MC35 User Manual Page 33