Siemens Gigaset S885 User's Guide download pdf (Page 44)

43

Notes on the user guide

Gigaset S880/S885 / EN for China / A31008-M1902-Y101-3-5D19 / appendix.fm / 27.7.09

Version 4, 16.09.2005

At the time of going to print, batteries up

to 900 mAh were available and had been

tested in the system. Due to the constant

progression in battery development, the

list of recommended batteries in the FAQ

section of the Gigaset Customer Care

pages is regularly updated:

www.gigaset.com/cn

Base station power consumption

In standby mode:

Gigaset S880: approx. 1.2 watt

Gigaset S885: approx. 1.6 watt

During a call:

Gigaset S880: approx. 1 watt

Gigaset S885: approx. 1.5 watt

General specifications

Notes on the user guide

This section explains the meaning of cer-

tain typographical conventions that are

used in this user guide.

Example of a menu input

The steps you need to perform are shown

in abbreviated form in the user guide. This

is illustrated below using the example of

"Setting the contrast for the display". The

things you have to do are explained in the

boxes.

WDCT standard is supported

No. of channels 80 duplex channels

Radio frequency

range 2400–2483.5MHz

Duplex method Time multiplex,

10 ms frame length

Bit rate 576 kbit/s

Modulation GFSK

Transmission

power

25mW, average power per

channel

Range up to 300 m outdoors,

up to 50 m indoors

Base station

power supply 230 V ~/50 Hz

Environmental

conditions in oper-

ation

+5 °C to +45 °C;

20% to 75% humidity

Dialling mode DTMF (touch tone dial-

ling)/DP (dial pulsing)

v ¢  ¢ Display

¤ With the handset in idle status, press

on the right of the control key (v) to

open the main menu.

¤ Select the line Settings using the con-

trol key q.

¤ Press v or press the display key §OK§ to

confirm the Settings function.

The Settings submenu is displayed.

¤ Press on the bottom of control key q

repeatedly until the Display menu func-

tion is selected.

¤ Press v or press the display key §OK§ to

confirm the selection.

Contrast Select and press

§OK§.

¤ Press on the bottom of control key q

repeatedly until the Contrast menu

function is selected.

¤ Press v or press the display key §OK§ to

confirm the selection.

r Select contrast and press the

display key

§Save§.

¤ Press on the right or left of the control

key to set the contrast.

¤ Press the display key §Save§ to confirm

the selection.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 52 53

Comments to this Manuals

No comments