Siemens Gigaset S880 User's Guide download pdf (Page 11)

9

First steps

Gigaset S880/S885 / EN for China / A31008-M1902-Y101-3-5D19 / starting.fm / 31.5.10

Version 4, 16.09.2005

Attaching the belt clip

There are notches for attaching the belt clip

on the side of the handset at the same

height as the display.

¤ Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

Opening the battery cover

¤ Place your fingertip in the cavity on the

casing and pull the battery cover

upwards.

Placing the handset in the base station

and registering

¤ Place the handset in the base station with

its display facing upwards.

The handset registers automatically.

Registration can take up to 5 minutes. While

this is happening, Regstr.Procedure appears

in the display and the name of the base sta-

tion flashes. The handset is assigned the low-

est available internal number (1-4).

This will appear in the display when registra-

tion is complete, e.g. INT 1. This means that

the number 1 has been assigned. If the inter-

nal numbers 1–4 are already assigned to

other devices, the number 4 is overwritten.

To charge the batteries, leave the handset in

the base station.

For questions and problems see page 41.

Headset socket

You can connect various headset types (with

2.5 mm jack connector).

See the relevant product page at

www.gigaset.com for information on recom-

mended headsets.

Please note:

– Automatic registration is only possible while

no calls are being made from the base station.

– Each key press interrupts the automatic regis-

tration.

– If automatic registration does not work the

handset will have to be registered manually

(page 24).

– You can change the name of the handset

(page 27).

Please note:

– The handset will automatically switch on if it

is placed in the base station.

– Only place the handset in the base station or

charging cradle that is intended for it.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

Comments to this Manuals

No comments