Siemens Gigaset 8825 User Manual download pdf (Page 3)

Handset Setup

Gigaset 8800 Handset

The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a

total of eight handsets may be added.

Handset Setup

Before using your handset, follow these steps:

Cordless Handset Registration

The cordless handset that comes with the system is preregistered to the base

station. Additional cordless handsets need to be registered to the base

station.

1 If the handset is not already on, press PWR key in the

lower right corner of handset.

2 When Please Register is displayed, press OK.

3 Enter System PIN and press OK (default is 0000).

4 At base station, press MENU.

5 Scroll to System Settings by pressing >FWD key and

then press SELECT.

6 Enter System PIN and press SELECT (default is 0000).

7 Scroll to Mobile Registration by pressing >FWD key

and then press SELECT.

8 When Select Intercom Number is displayed on handset, scroll

to number you want to assign, and press OK.

9 When completed, you will hear a confirmation beep.

See User Manual for additional options.

IMPORTANT: Charge batteries 12 to 14 hours before using the

handset for the first time. WARNING: Use only NiCd or NiMh

AA rechargeable batteries. DO NOT USE ALKALINE, LITHIUM,

OR NON-RECHARGEABLE BATTERIES.

2 Insert batteries

as shown.

3 Place cover on back

of handset and push

gently upward until it

clicks into place.

1 Remove protective

plastic film from display.

4 Place handset

in charger with

display facing

out.

Customer Care: 1-888-777-0211

Or visit our Website: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

Power key

–

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Siemens Gigaset 8825 User Manual Page 3

Comments to this Manuals

Related products and manuals for Telephones Siemens Gigaset 8825